Ampco - non-sparking, non-magnetizing corosion resistant hand tools
1914 the inventor August Littman made an exciting discovery: new bronze alloy , hard enough to cut steel. The inventor and a small group of entrepreneurs formed the American Metal Products Company, and became the leading company in aluminium bronze alloy production.
American Metal Products Company (later known as "Ampco") produced the first line of safety hand tools made of aluminium bronze in 1922. This was the start of the Ampco Safety Tools. The unparalleled strength and durability of the tools made of aluminium bronze was quickly accepted in the industrial markets.
Today, most of the AMPCO safety tools is made in Garland, Texas. Ampco Safety Tools continue to produce top quality safety tools and give unparalleled customer satisfaction.
BAUR Sulz - Austria, is a family company in which the knowledge and experience is succeeded from one generation to another.
BAUR is the pioneer in production of the cable fault location instruments, cable testing, cable diagnosis and the insulation testing. They offer more than 120 products that are compliant with all international standards and norms.
They are present at this field for over 70 years and have representatives in more than 80 countries across the world, on every continent, with offices in Germany, Hong Kong, Brasil, UK and Spain.
The complete production,service and support is situated in Austria, in Sulz.
Bonomi - railway equipment
Gruppo Bonomi offer wide selection of products for the railway and tram division. From signaling to electrical haul, Bonomi offers traditional and innovative solutions that comply to technical standards in every country of business.
Consoles and equipment from 1.5kV to 25kV:
- Aluminium High Speed consoles
- Traditional iron/steel consoles
- Tunnel consoles
- Tram consoles
- Consoles for OH contact lines 750V to 25kV
Clamps and cable lugs (according to compression or mechanical tightening)
Bosch - professional tools for crafts and industry
Professional blue Bosch power tools are developed in order to perform top quality work. They meet the highest demands in performance, punctuality and resistance to achieve great professional results. Here we will show you our up-to- date product innovations.
Danfoss - cooling techniques, heating, industrial automation
Danfoss Group is world-wide manufacturer of components and solutions. Products and services are used in areas like refrigeration, air conditioning, heating, AC drives, power solutions for mobile machines. The company is active in solar and wind energy, and also in remote ditsrict heating and cooling for whole cities and urban areas.
Elcometer - control equipment
Elcometer is the world leader in the design, manufacture and supply of inspection equipment to the coatings, concrete and metal detection industry.
Endress - power generators
ENDRESS is specialized in development, production and distribution of first-class generators since 1914. ENDRESS has secured its’ role in the future by innovation and product novelty which are technically ambitious and set trends in the industry.
Important postulates of company policies:
Performance and reliability by selection of top components and standardized quality.
Future and environment protection orientated technologies by development and production.
ENDRESS know-how in places around the world.mjestima diljem svijeta.
Innovation and product development, as well as adopting advice are part of the company’s service oriented philosophy. This way ENDRESS answers to growing demands and internationalization of trade transactions in the future.
Graco - air and pressure spray guns
Graco is a top manufacturer of fluid handling systems and spare parts. Graco brings technology and experience in fluid management in both industrial and domestic applications. Graco designs, produces and sells t systems and equipment for transport, measuring, control, dispersion and spraying of any fluids.
Intercable - Plastic parts and power energy distribution tools production
Since its’ founding in the early 1970’s Intercable has become the leading company in the market. It constantly grows, and brings innovative solutions to customers. Intercable offers wide selection of products, including the development and production of plastic parts and components, new ideas for hybrid and electrical vehicles and specialized tools for electric power distribution.
Loctite - top quality industrial adhesives and sealants
Henkel brand LOCTITE is a verified source for well-thought high performance solutions for sealing, sealing and coating.
Noja power -
Reflex - Reflex Zlin, spol. s r.o.
Reflex is the manufacturer of fibreglass containers for waste separation with bottom emptying, semi-underground and underground containers since 1990. Since 2006 they moved the production facilities to newly built modern area in the industrial zone of town Zlín, Czech Republic. The production program has a wide range of products which are always adjusted to the customer. All the containers are certified by the EN 13 071-1 : 2008 standard.
High standards of our products, our capacity, concise and reliable service are the grounds for the successful development of our company.
Rodac - air and pneumatic tools
Rodac International offers wide selection of pneumatic air tools, accessories and equipment for workshops. Rodac has become one of the leading comanies thanks to its’ wide selection of pneumatic tools and good price to quality rate of the products.
Ruko - drill bits and saws
Customer satisfaction through high quality. RUKO has been following this motto throughout the company’s history . It was founded in 1974 in Böblingen, and it was reorganized in 1980 to RUKO GmbH Precise tools. At that time the company was focused on drilling tools and saws production.Since 1990 the company is based in Holzgerlingen(close to Stuttgart). The new facilities are 5,600 m² big, from which 1,000 m² are offices, 2,400 m² production area and 2,200 m² sales area.
Sata - air and pressure paint sprayers
SATA is one of the leading producers of varnishing products. SATA sets standards in following areas:-spray pistols manufacture, compressed air filters and taking care of workers’ health.
Spirax Sarco - steam system equipment
Spirax Sarco is synonymous with excellence in steam system engineering, for efficient stem usage and control as well as other industrial fluids. Spirax Sarco offers solutions for compleltely new boiler plants to a mere replacement valves.
Tolsen - hand tools
TOLSEN tools are focused on creating hand tools and similar products of professional quality.
All TOLSEN products are strictly controlled in every step during the planning, designing, manufacture, packaging and in the quality control process. In TOLSON he y believe that quality tools must have good usability, efficiency and performance ratio. Different from OEM markets, the advantages of TOLSTEN tools are:
Always available stock of products
Usag - tools
The history of USAG reflects the history of Italian industry: from one man’s entrepreneurship, hard working Hermann Amos, to a global company. The adventure has started in Gemoni, in 1926. The location is a blacksmith’s workshop from the 19th century known as the Red House. USAG as soon to become a professional competitor in tools sector, along with many small companies, and together they changed the Italian economy.
The company’s success reflects in many fairs, with a patent for tools destined to leave a mark industrial history, and with a stamp that carries great symbolic value. In 1991 USAG reached new heights when becoming a part of the international FACOM group, when it successfully optimized the production and thus widened its’ business and became a global company.
Weber - Municipal Equipment
Sorting containers, waste collection and disposal containers are part of Weber's product range. They are suitable for various types of disposal of selective waste such as paper, glass, package and the like. All products are produced in Weber's premises in Haan, near the city of Düsseldorf according to DIN 30740 / EN 840. All products are manufactured exclusively from materials resistant to UV, cold, heat and chemicals.
High standard of our products, our capabilities, accurate delivery and reliable service, are the basis for our company's successful development.
Return to all manufacturers
Hand saws for metal, hacksaw blades, hole saw blades.
Concrete drills, channel chissels, SDS-plus chissels, ljeta, SDS-max chissels. Application in concrete drilling, masonry, stones, brick....
Wood twist drills, twist augers, formwork drills, Forstner drills, flat drills, wood processing sets
Twist drills, special drills, sheet drills for pipes and tins, step drills, countersinks,machine taps, core drills, , rotary burrs "tungsten carbide",hole saws, screw hole punches, deburring tools